Our mission:
we provide durable solutions
for elastic energy control

+7 (34792) 4-13-00

Call order
Русская версия English version Facebook VK instagram
A torsion spring

Configuration

“Ural Spring Plant” Ltd. produces torsion springs with various parameters and of different configurations. We manufacture torsion springs both according to GOST and to Customer’s drawings. Depending on Customer’s needs, springs can be produced with hooks of different configurations. For production of torsion springs wire of the following steel grades is used: 60С2А, 55С2, 65Г, Ст70, with diameter 1.2 to 14.0 mm. If necessary, spring are exposed to heat treatment that allows to keep spring shape and its elastic properties during the whole working life of a spring. The heat treatment is also required for removal of internal stresses in coiled springs, this technological process is used for removal of initial tension and ensures spring stability. During heat treatment spring metal is exposed to gradual temperature changes that results to increase of elastic properties and viscosity, due to that high quality and safe operation of springs are ensured. Torsion springs are widely used in general engineering, automotive, agricultural industries, as well as in precision engineering.

Why choose us?

  • We are leaders

Experience

  • Working since 1997

A torsion spring

“Ural Spring Plant” Ltd. produces torsion springs with various parameters and of different configurations. We manufacture torsion springs both according to GOST and to Customer’s drawings. Depending on Customer’s needs, springs can be manufactured with hooks of different configurations. For production of torsion springs, wire of the following steel grades is used: 60С2А, 55С2, 65Г, Ст70, with diameter 1.2 up to 14.0 mm.

10.jpg
Spring coating. 
There are two purposes of spring coating: to protect the spring from corrosion and to improve the surface appearance of the spring. Coating differs in resistance: from resistance to normal operation conditions up to resistance to corrosive environment. 
Depending on Customer’s requests, springs produced at “Ural Spring Plant” may be either coated or not according to a drawing. 
We are ready to provide the following coatings: 
- paint coating ((PF-115) ПР-115, (NC 132) НЦ 132, (AF “Shchit”) АФ "Щит") 
- chemical oxidation with oiling 
- polymeric powder coating 
- electrolytic zincing 
Cost of springs depends on the following parameters 
-product configuration (parameters) 
- quantity of ordered products 
2,2.jpg1,2.jpg
3,3.jpg

Order

Awards and сertificates